$125 Order Minimum Total Required!
The M5600 is one of our best-selling full sized float switch and is in stock for same day float switch ordering. The M5600 series stainless steel float switch is designed specifically for liquid level sensing in demanding fluid level sensor applications. This durable stainless steel float switch is the perfect sensor for a wide range of liquids, from high purity to high temperature or high pressure corrosive liquids. The 1/4” npt threaded stem can be easily adapted to standard pipe fittings or conduit, to seal the float switch wires from liquids, or for sending the sensor deep into liquids for Low level detection. These float switches fit easily through 2" NPT fittings or most flanges. Many of our full sized float switch point level sensors have agency approvals from UL, CSA, CE and NSF. Many of our Stainless Steel float switches and sensors also carry approvals for Hazardous Locations and Food Equipment if required.
Note: SPST = Single Pole, Single Throw Reed Switch
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
The M5602-XXXX is a multi-point switch made from 316 stainless steel stem and floats.
IMPORTANT: The number of float points and their locations are custom selected through the use of our PRODUCT CONFIGURATOR. You can also select an appropriate mounting and switch operation, along with a few other basic selections. Upon submittal of your custom part in the Switch Configurator, a quote will be generated for you.
Use "M5602" as your base part number when prompted by the Product Configurator.
Configure your Switch on-line and receive a quote instantly!
Note: SPST = Single Pole, Single Throw; SPDT = Single Pole, Double Throw
Application: "Propelling" a Container Ship Forward
|Type||Full Size SS Float Switch Sensor|
|Stem Material||316 Stainless Steel|
|Float Material||316 Stainless Steel|
|Float SG||0.55 SG|
|Fitting Type||1/4" NPT Pipe Thread|
|Max. Pressure||200 PSIG|
|Switch Rating||60 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||24", 22 AWG, Teflon Insulated (Standard)|
|Approvals||NSF, CE, UL Haz. Loc., CSA Haz. Loc.|
|AC Voltage||60 VA Nominal - 0.50 amps max. @ 120 VAC, ( 0.40 amps @ 240 VAC)|
|DC Voltage||60 W Nominal - 0.50 amps max @ 24 VDC, ( 0.20 amps @ 120VDC)|
|Minimum Order Quantity||3 Pcs.|
|Available Same Day||50 Pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.|
|Note 2||The wire clips are made to be removed and replaced up to 10 times, while maintaining a holding force of greater the 4 lb. force. See wire clip data sheet on documents tab.|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477