$125 Order Minimum Total Required!
The M8750 side-mounted liquid level switch has a polypropylene stem and a polypropylene float. The M8750 series side mount plastic float switches are designed for liquid level sensing for a wide variety of fluids and conditions. These hermetically sealed float switches provide years of dependable sensing at an economical cost. Used with standard 1/2” NPT threaded stem, these plastic switches provide control signals for many different liquid level sensor applications. Any of our side mount float switches can easily be mounted through the wall of a tank as a High or Low level float switch
Note: SPST = Single Pole, Single Throw
Madison Company uses only polypropylene that is FDA-approved for food contact in these float switches. Polypropylene is also a great choice for chemical resistance from DI-water to Acidic fluids used in electroplating or chemical processes.
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
|Float SG||0.60 SG|
|Fitting Type||1/2" NPT Pipe Thread|
|Max. Pressure||100 PSIG|
|Switch Rating||30 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||24", 22 AWG, MTW Insulated (Standard)|
|Approvals||NSF, CE, UL, CSA|
|AC Voltage||30 VA Nominal - 0.28 amps max. @ 120 VAC, ( 0.14 amps @ 240 VAC)|
|DC Voltage||30 W Nominal - 0.28 amps max @ 24 VDC, ( 0.07 amps @ 120VDC)|
|Minimum Order Quantity||15 pcs|
|Available Same Day||50 pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477