$125 Order Minimum Total Required!
The M4300 liquid level float switches have a brass stem and a Buna-N float and are ideal for oil, water and petroleum liquid applications. Buna-N is typically suitable for use with aromatic hydrocarbons, diluted acids, and bases. These single point float switches are great for high or low tank level control.
Note: SPST = Single Pole, Single Throw Reed Switch
Use these switches for petroleum-based liquids, such as lubricating oils, gasoline and diesel fuels. Widely used in storage tanks of vehicles, generators, transmissions and hydraulic systems. Other common uses are for lubrication oils, fluid recovery, refining and fuel processing switch level indication.
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
|Type||Full Size Switch|
|Float SG||0.45 SG|
|Fitting Type||1/4" NPT Pipe Thread|
|Max. Pressure||150 PSIG|
|Switch Rating||60 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||24", 22 AWG, MTW Insulated (Standard)|
|Approvals||CE, UL, CSA, ABS|
|AC Voltage||60 VA Nominal - 0.50 amps max. @ 120 VAC, ( 0.40 amps @ 240 VAC)|
|DC Voltage||60 W Nominal - 0.50 amps max @ 24 VDC, ( 0.20 amps @ 120VDC)|
|Minimum Order Quantity||6 Pcs.|
|Available Same Day||50 Pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.|
|Note 2||The wire clips are made to be removed and replaced up to 10 times, while maintaining a holding force of greater the 4 lb. force. See wire clip data sheet on documents tab.|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477