$125 Order Minimum Total Required!
The M4500 miniature liquid level float switch has a brass stem and a Buna-N float. Buna-N is typically suitable for use with aromatic hydrocarbons, diluted acids, and bases. This miniature float switch works well in petroleum fluids, and mounts easily to a NPT pipe fitting to be extended into fluids via standard pipe, for high or low level float switch liquid control.
Note: SPST = Single Pole, Single Throw
Tank level indication for petroleum-based liquids, such as lubricating oils, gasoline and diesel fuels. Widely used in storage tanks of vehicles, generators, transmissions and hydraulic systems. Often uses for in lubrication fluid recovery, refining and fuel processing.
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
|Float SG||0.45 SG|
|Fitting Type||1/8" NPT Pipe Thread|
|Max. Pressure||150 PSIG|
|Switch Rating||30 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||24", 22 AWG, Teflon Insulated (Standard)|
|Approvals||CE, UL, CSA, ABS|
|AC Voltage||30 VA Nominal - 0.28 amps max. @ 120 VAC, ( 0.14 amps @ 240 VAC)|
|DC Voltage||30 W Nominal - 0.28 amps max @ 24 VDC, ( 0.07 amps @ 120VDC)|
|Minimum Order Quantity||7 Pcs.|
|Available Same Day||25 Pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages|
|Note 2||The wire clips are made to be removed and replaced up to 10 times, while maintaining a holding force of greater the 3 lb. force. See wire clip data sheet on documents tab.|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477