$125 Order Minimum Total Required!
The M8600 liquid level float switch has a stainless steel stem and a Polypropylene float. This is a durable alternative to the M8800, where a more rigid stem is required to protect the float switch stem from turbulence, aggressive cleaning, or other difficult float switch applications. It is also a great option for steamers or food equipment applications up to 105°C. This float switch is a good choice for commercial appliances and equipment.
Note: SPST = Single Pole, Single Throw Float Switch Operation
Madison Company uses only polypropylene that is FDA-approved for food contact in these float switches. Polypropylene and stainless steel are great choices for chemical resistance in DI-water, salt water, or mild acids.
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
|Type||Full Size Switch|
|Stem Material||316 Stainless Steel|
|Float SG||0.75 - 0.77 SG|
|Fitting Type||1/4" NPT Pipe Thread|
|Max. Pressure||100 PSIG|
|Switch Rating||60 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||24", 22 AWG, Teflon Insulated (Standard)|
|Approvals||NSF, CE, UL, CSA|
|AC Voltage||60 VA Nominal - 0.50 amps max. @ 120 VAC, ( 0.40 amps @ 240 VAC)|
|DC Voltage||60 W Nominal - 0.50 amps max @ 24 VDC, ( 0.20 amps @ 120VDC)|
|Available Same Day||15 Pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.|
|Note 2||The wire clips are made to be removed and replaced up to 10 times, while maintaining a holding force of greater the 4 lb. force. See wire clip data sheet on documents tab.|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477