$125 Order Minimum Total Required!
The M3782 liquid level switch has a brass stem and a Buna-N float and is equipped with a PBT slosh shield. A slosh shield should be considered if your operating environment contains intensive agitation of the liquid, boiling fluids, or surging due to large inflows and outflows of liquid. These turbulent conditions may result in erratic float operation.
Buna-N is typically suitable for use with aromatic hydrocarbons, diluted acids, and bases.
The PBT slosh shield on the M3782 is not recommended for use in hot water or soap water applications above 65°C.
Same day shipping available under our Switch-In-Time program.
Note: SPST = Single Pole, Single Throw
The selection for petroleum-based liquids, such as lubricating oils, gasoline and diesel fuels. Widely used in storage tanks of vehicles, generators, transmissions and hydraulic systems. Often uses for in lubrication fluid recovery, refining and fuel processing.
Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages.
|Type||Miniature Submersible Suspendable Switch|
|Float SG||0.45 SG|
|Slosh Shield Material||PBT|
|Max. Pressure||50 PSIG|
|Switch Rating||30 Watt, 240V max. (AC/DC), SPST|
|Lead Wires||240'', 22 AWG Halar Jacketed Cable (Standard)|
|AC Voltage||30 VA Nominal - 0.28 amps max. @ 120 VAC, ( 0.14 amps @ 240 VAC)|
|DC Voltage||30 W Nominal - 0.28 amps max @ 24 VDC, ( 0.07 amps @ 120VDC)|
|Minimum Order Quantity||2 Pcs.|
|Available Same Day||5 Pcs.|
|Note 1||Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages|
|Note 2||PBT slosh shield is not suitable for use in water above 65C|
Contact Madison Co. if you have technical questions or need additional information not displayed here. Call - 203 488 4477